STEEL PIPE KNOWLEDGE & INSIGHTS

Steel Pipe Articles & Industry Insights

Field Joint Coating on FBE Pipelines: Who Does What on an Island Project

On an FBE pipeline, the mill coating is usually the best-protected surface on the project. It is applied on a controlled line, tested per pipe and recorded. The field joint coating is the opposite: it is applied outdoors, by a different party, under schedule pressure, and often inspected by whoever is available. It is also the point where the line either becomes electrically continuous or does not. On an island project with barge transfers and a second lift, the joint also has to survive handling that no mill test can simulate.

I. Why the Joint Governs Performance

A coated line is a series of coated pipes with bare steel rings between them. Those rings are welded, and the weld area plus the cutback is then re-coated. The area is small in total but it is repeated at every pipe length, and each repetition is a chance for a discontinuity. On a 12 m pipe, a one kilometre line has more than eighty joints; on a 9 m pipe, more than a hundred

The field joint coating is therefore the controlling item for the line’s corrosion performance, and it is the item most often left without an owner in the technical agreement. Naming the material but not the applicator, or naming the applicator but not the acceptance test, produces a joint that nobody can accept with confidence.

II. Matching the Joint to the Mainline Coating

Joint materials are not universally interchangeable. A heat-shrink sleeve, a flame-sprayed polyethylene, a liquid epoxy and a tape wrap each have a compatible mainline coating family and a required cutback geometry. An fbe coated pipe mainline with a polyethylene joint is a mixed system that may be acceptable under the owner’s specification, but only if compatibility and the overlap length are defined.

Where the mainline is a three layer system, the joint material is usually a polyolefin-based product with an adhesive that bonds to the 3lpe coating edge. Where the mainline is FBE, a liquid epoxy or a compatible shrink sleeve is common. Substituting one for the other on site because the correct material did not arrive is how a mixed and unrecorded system is created.

III. Summary

Name the joint material, the applicator, the acceptance test and the record — then sequence repairs before joints. Youcheng supplies 3PE coated SSAW steel pipe, spiral welded steel pipe and large-diameter spiral steel pipe with per-pipe coating records. Related: the 3LPE coating process and anti-corrosion pipe for coastal stations. Send your joint detail and we will confirm compatibility. Related reading: 3LPE coating process; 3LPE coated steel pipe; steel pipe hydrostatic test; contact page. Related reading: 3LPE coating process; 3LPE coated steel pipe; steel pipe hydrostatic test; contact page.

Related Articles

Scroll to Top